Roll Off Containers

Roll off mini bins sizes from 12 to 24 cubic yards. Ship up to 20 bins per load. Economy line for roll off mini bin service industry.
Primed and painted (single color)
3–year parts and labour warranty.

Hook lift Main rails 5” x 2” x 3/16” tube
Cable pull Main rails 4” x 2” x 3/16” tube
Cross members 2” x 2” x 1/8” tube on 24” centers
Walls, doors and fronts 12ga (.104) HR sheet
Floors 10ga HR Sheet
Rear post 4” x 3” x 1/8” steel tube
Front rail 3” x 3” x 1/8” steel tube
Side rails 3” x 3” x 1/8” steel tube
Landing gear (wheel mount) 4” x 2” x 3/16” steel tube
Door frame 3” x 2” x 1/8” steel tube
Hinges ½” x 4” flat bar and 1-1/4” extra heavy pipe with 1-3/16” cold rolled pin
Latch
 SCS easy open design
Wheels
 4” standard pipe with 1-1/4” extra heavy pipe hubs and 1-3/16” cold rolled shaft
 All wheels have full length hubs for axle support and mount to the landing gear cross member with 1/2” steel plat
Welding
 Full length continuous welds on inside floor seam, inside front wall and around rear of container.
 Front and side rails continuous welds inside
 Stitch welds on outside floor seams

A–Frame 36” if applicable.

Note:  Body measured by floor length – add approximately 1 ft for overall length.

Print Version...(Mini Tub)

12 to 24 cu. yards.
Primed and painted (single color)
3–year parts and labour warranty.

Hook lift Main rails 5” x 2” x 3/16” steel tube
Cable pull Main rails 4” x 2” x 3/16” steel tube
Cross members 2” x 2” x 1/8” steel tube on 18” centers
Walls, doors and fronts 12ga steel plate
Floors 10GA HR sheet, Formed
Rear post 4” x 3” x 1/8” steel tube
Front rail 3” x 3” x 1/8” steel tube
Side rails 3” x 3” x 1/8” steel tube
Landing gear (wheel mount) 4” x 2” x 3/16” steel tube
Hinges 1/2” x 4” thick flat bar and 1-1/4” extra heavy pipe with 1-3/16” cold rolled pin
Latch
 SCS easy open design
Wheels
 4” standard pipe with 1-1/4” extra heavy pipe hubs and 1-3/16” cold rolled shaft
 All wheels have full length hubs for axle support and mount to the landing gear cross member with 1/2” steel plat
Welding
Inner floor seams, front and rear wall seams and inside top rail seams are continuous welds.

A–Frame 35-1/2” if applicable.

Note:  Body measured by floor length – add approximately 1 ft for overall length.

Print Version...(Premium Mini Tub)